Filter
Top Products
38 39
Status
Use this page to view the version of software currently running on your SoundBridge. You can
also review your network connection information, including IP address and MAC addresses.
If you are using a Wi-Fi connection, this page will display your Wi-Fi signal strength and the
name of the network to which you are connected. When you are fi nished using your web page,
simply close your browser window.
SECTION 8: WHEN YOU ARE FINISHED USING SOUNDBRIDGE
When you are fi nished playing music and using your SoundBridge altogether, just press the
Standby [] button on your remote. In Standby mode, SoundBridge can display the date and
time or a blank display, depending on your preference.
If you were playing Internet radio when you pressed Standby, then pressing Standby again will
resume playback of that station. Otherwise it will return you to the music library to which you
were most recently connected.
If you plan to disconnect SoundBridge from AC power after you are done using it, be sure to
press the Standby button fi rst. This logs you out of the music server software running on your
computer.
Note: Wait approximately 10 seconds after pressing Standby [] before unplugging
SoundBridge; this gives SoundBridge time to fl ush its settings for a clean reboot.
8
Section 8: When You Are Finished Using SoundBridgeSection 7: SoundBridge Web Interface