Administrator Guide
17
Configuring a New Appliance with Setup Wizard
The Appliance Setup Wizard guides you through five configuration steps for the
Appliance:
1. Serial number registration
2. Naming the Appliance
3. Configuring Network (optional)
4. Verifying the date and time
5. Assigning an administrative password
• After completing each step, click Next to proceed to the next step.
• If you need to modify settings in a previous step, click Previous.
• If you need help completing a step, click Help to access additional information for that
setup step.
• To cancel the setup wizard, click Cancel at any time.
1 Entering the serial number
• Enter the serial number that was included with the ApplianceView package.
• Click Next to proceed to the next step.