Filter
Top Products
30
EN
Receiver Operations
Some preparatory steps are needed before starting playback.
Turning on the receiver
1 Turn on the power to the related components.
2 Turn on the power to this receiver by pressing the
POWER ON/STANDBY
or the ON/STANDBY key (or
the POWER RCVR key).
÷ After turning off a power supply, the POWER ON/STANDBY
or the ON/STANDBY key is not effective for 3 seconds.
Selecting the input mode
If you have selected a component connected to the COAX 1 (DVD),
COAX 2 (VIDEO 1), OPT 1 (VIDEO 2), OPT 2 (AUX) or DIGITAL IN
(OPTICAL) jacks, make sure that the input mode setting is correct for the
type of audio signal to be used. 9
Normal playback
VOL /
VOLUME CONTROL
INPUT SELECTOR
Input selector keys
Input selector keys
Listening to a source component
1
Press the INPUT SELECTOR key (or the Input selector keys/
DVD, VID1, VID2, AUX, F.AUX, Game, TUNER, Network Server
or Memory Card) to select the source.
1 "TUNER"
2 "DVD"
3 "VIDEO1"
4 "VIDEO2"
5 "GAME"
6 "F.AUX"
7 "AUX"
8 "NET SERVER"
9 "MEMORY CARD"
÷ When the “NET SERVER” or “MEMORY CARD” input is
selected, the OSD function on the TV screen is activated and
detection of the server starts. RO
2
Start playback from the selected source.
3
Use the VOLUME CONTROL knob (or the VOL +/- keys) to
adjust the volume.
POWER RCVR
Input Mode
RCV Mode
INPUT SELECTORON/STANDBY
POWER ON/STANDBY
*5489/30-37/EN 04.7.30, 10:40 AM30