Filter
Top Products
10
EN
Preparations
Setting up the system
Connecting Ethernet cable Connecting wireless LAN
ETHERNET
ETHERNET
Modem
PC:
Windows XP Professional SP1,
Windows XP Home Edition SP1,
Windows 2000 Professional SP4 or after.
To
Internet
Ethernet cable
Ethernet cable
Broadband
router
Wireless broadband router
PC:
Windows XP Professional SP1,
Windows XP Home Edition SP1,
Windows 2000 Professional SP4 or after.
Modem
Wireless Ethernet bridge
÷ This unit is not provided with the Internet connection facility.
÷ When this unit is connected to a PC, FM broadcast reception may be interfered with noise. In this case, try the following remedial actions.
1. Increase the distance between this unit and the PC.
2. When the provided FM indoor antenna is in use, replace it with the FM outdoor antenna. &
3. Replace the Ethernet cable with a shielded cable.
Connect the wireless Ethernet bridge to the ETHERNET jack on the rear
panel.
To AC wall outlet
To
Internet
Ethernet cable
Ethernet cable
Modular cable
Ethernet cable
Modular cable
When not using a broadband router or hub, connect this unit directly to
the PC using a cross Ethernet cable. In this case, it is required to set the
IP address and subnet mask manually. ª
Ethernet cable
*
*
* Please refer to the instruction manual of your router or hub. Depending on your router or hab they may in rare case not work with
a cross Ethernet cable.
*5489/09-17/EN 04.7.30, 10:39 AM10