Filter
Top Products
26
EN
Preparations
Network settings
This unit can be connected to a PC through a LAN circuit.
It is required to set up the network before connecting this unit to the PC.
1
Use the INPUT SELECTOR key (or the Network Server key) to
select “NET SERVER”.
When the “NET SERVER” input is selected, the OSD function on the
TV screen is activated and detection of the server starts.
SEARCHING
2
Use the MULTI CONTROL
@
/
#
(or the Multi
@
/
#
keys) to
select “SETUP”, and press the ENTER (or the Enter key) .
SETUP RETRY
WARNING
Could not detect server.
Please chek following item.
1. Starting server
2. Starting PC application
3. Install PC application
4. Network connection & setting
3
Use the MULTI CONTROL
%
/
fi
(or the Multi
%
/
fi
keys) to select
“Network Setup”, and press the ENTER (or the Enter key) .
Receiver Setup
Network Setup
Exit
NET LINK PC SERVER1
Setup Menu
4
Use the MULTI CONTROL
%
/
fi
(or the Multi
%
/
fi
keys) to select
the setting item, and press the ENTER (or the Enter key) .
When the “Main” has been selected :
Main
IP
Menu Language
Back Back
Video Out
Screen Saver
Black Level Setup
Fifmware Update
English
NTSC/CVBS/Y/C
ON
7.5 IRE
NET LINK
Network Setup
1 "Main” Setting: ¶
This includes the setting of the language of the OSD
menu, setting of the video format used when this unit
outputs the video or photo data in PC that has been
input through the network, setting of the screen saver,
setting of the black level, and updating of the firmware.
2 "IP” Setting: ª
This consists of the setting of the IP address.
3 "Back”: Select “Back” and press the ENTER (or the Enter
key) to return to the previous display. (The same operation is
also available by pressing the Return key or Multi @ key)
÷ While the main setup screen is displayed, the setup mode can
be canceled by pressing the SETUP key (or the Setup key).
5
Use the MULTI CONTROL
%
/
fi
(or the Multi
%
/
fi
keys) to select an
option or input the desired numeric or alphabetic characters using
the numeric keys, and then press the ENTER (or the Enter key).
÷ If you made a mistake, press the Clear key and input the
correct character.
When the “Menu Language” has been selected :
Main
IP
NET LINK
Back
English
German
French
Spanish
Italian
Dutch
Japanese
Menu Language
Video Out
Screen Saver
Black Level Setup
Fifmware Update
Back Back
Network Setup
6
Press the ENTER (or the Enter key) again to return to the main
setup displays.
7
Turn off the power to this receiver by pressing the POWER ON/
STANDBY
(For U.S.A. and Canada) or the ON/STANDBY
(For Europe and Australia) key (or the POWER RCVR key).
Preparing for playback
SETUP
ENTER
MULTI CONTROL
%/fi/@/#
Setup
POWER RCVR
Multi %/fi/@/#
Enter
Return
ON/STANDBY
POWER ON/STANDBY
Clear
Network Server
INPUT SELECTOR
Numeric keys
Preparation
Turn on the power to this receiver by pressing the
POWER ON/STANDBY
(For U.S.A. and Canada) or the
ON/STANDBY
(For Europe and Australia) key (or the
POWER RCVR key on the remote).
*5489/18-29/EN 04.7.30, 10:39 AM26