Filter
Top Products
Masterpage:Right+
EN 71
Filename [DVM70S_13Subsidiary.fm]
SUBSIDIARY SETTINGS
Page 71Friday, 6 May 2005 12:06
DISC PLAY SET UP
8 RESUME ^ OFF / ON / DISC RESUME
When this function is set to AONB or ADISC RESUMEB, you can use
the resume function. (A pg. 26)
OFF:
You cannot use the resume function.
ON:
You can start playback from the resume point of the placed disc.
DISC RESUME:
The unit retains a memory of the resume points of the last 30
discs played back, even though they have been ejected.
NOTE:
ADISC RESUMEB setting works on DVD VIDEO, VCD, SVCD and
already finalized DVD-R/DVD-RW (video mode) discs. For other
types of discs, the function under AONB setting will be applied even
if ARESUMEB is set to ADISC RESUMEB.
HDD SET UP
8 LIVE MEMORY ^ OFF / 30 MIN / 1 HR / 3 HR
When this function is set to A30 MINB, A1 HRB or A3 HRB, you can
apply the selected time length to ATemporary recording for Live
Memory (HDD deck only)B (A pg. 45).
DVD SET UP
8 SAVE AS LIBRARY ^ OFF / ON
When this function is set to AONB, the recording information is
automatically stored in the library. For details, refer to AEdit Library
InformationB (A pg. 55).
8 CONTINUOUS PLAY ^ OFF / ON
When this function is set to AONB, multiple titles on a disc are
played back continuously one after another.
8 VIDEO MODE RECORDING ASPECT ^ PRIORITIZE 4:3 /
PRIORITIZE 16:9
This is the setting for the aspect ratio used when you dub titles to
DVD discs in video mode. If the titles you want to dub are recorded
in both 16:9 and 4:3, you must select one aspect ratio.
PRIORITIZE 4:3:
If you select APRIORITIZE 4:3B, even a title recorded in 16:9 is
dubbed in 4:3.
PRIORITIZE 16:9:
If you select APRIORITIZE 16:9B, even a title recorded in 4:3 is
dubbed in 16:9.
8 MP3 & WMA / JPEG ^ MP3 & WMA / JPEG
You can select files to play back, when both MP3&WMA files and
JPEG files are recorded on a disc.
MP3 & WMA:
Select this to play back MP3/WMA files.
JPEG:
Select this to play back JPEG files.
8 DISC TYPE ^ MANUAL START / MENU STOP / AUTO
REPEAT
MANUAL START:
To be chosen when you want to playback the disc manually by
pressing I each time after the disc is read.
MENU STOP:
To be chosen when you want playback to stop each time a
menu screen is displayed. The unit automatically starts
playback after the disc is read.
AUTO REPEAT:
To be chosen when you want the disc to be played back
repeatedly each time it is played back. The unit automatically
starts playback after the disc is read.
DV SET UP
8 DV AUDIO REC ^12BIT / 16BIT
This is the setting for sound mode before recording on a Mini DV
tape.
12BIT:
Enables Audio Dubbing later.
16BIT:
Audio Dubbing is not possible but the recorded sound quality is
higher than A12BITB
.
8 AUDIO MODE ^ SOUND1 / SOUND2 / MIX
You can select the desired sound mode when playing back an
audio dubbed Mini DV tape.
SOUND1:
Original recorded sound.
SOUND2:
Audio dubbed sound.
MIX:
Original recorded sound and audio-dubbed sound.
NOTES:
● When AAUDIO MODEB is set to AMIXB, both the main and sub
audio will be audible for bilingual tapes.
● To select only the main audio or only the sub audio of bilingual
tapes, set AAUDIO MODEB to ASOUND1B.
REC/PLAY SET UP
8 XP MODE REC AUDIO ^ DOLBY DIGITAL / LINEAR PCM
You can select the audio format when you record a title in XP
mode. When this function is set to ALINEAR PCMB, you can obtain
a high-quality audio sound.
DOLBY DIGITAL:
To record in Dolby Digital format.
LINEAR PCM:
To record in Linear PCM format.
ATTENTION:
When changing the settings in the ADV SET UPB menu while in
the DV deck mode, the unit will switch to HDD or DVD deck
mode. To proceed to DV deck after making the changes, press
DV/HDD/DVD on the unit repeatedly or DV on the remote control
to select the DV deck.
DVM70S_00.book Page 71 Friday, May 6, 2005 12:06 PM