JVC SR-DVM70US MP3 Player User Manual


 
Filename [DVM70S_06DVD Operation.fm]
Masterpage:Left+
26 EN
BASIC OPERATIONS ON DVD DECK
Page 26Friday, 6 May 2005 12:06
Slow Motion
1 Press W to pause during playback.
2 Press SLOW – (O) or SLOW + (N) for 2 or more seconds.
Each press of SLOW – (O) or SLOW + (N) increases the
slow motion speed for each direction.
Slow motion for reverse direction cannot be performed with
Video CD/SVCD discs.
Skip Search
During playback, press v.
Each press initiates an approximately 30-second period of fast-
motion playback. Normal playback resumes automatically.
Skip search cannot be performed when a VCD/SVCD disc is
being played back with the PBC function.
Jump Search
You can locate a scene ahead or behind the current one by
jumping scenes according to selected time intervals (A pg. 72)
during playback (or Live Memory Playback).
Press JUMP – or JUMP +.
To advance forward or back, press JUMP – or JUMP +
repeatedly within 5 seconds of each press to continue jump.
Depending on the time from where you want to start jump search,
the first press of JUMP – or JUMP + will not necessarily lead to a
jump of the selected time interval. The first press will lead to a
jump to the nearest quarter points of an hour (15 min/ 30 min/ 45
min/ 00 min). The subsequent jumps will then be in accordance
to the selected time interval.
When you cannot advance any further (beginning or end of
program reached), the message AUNABLE TO GO BACK ANY
MOREB appears on the screen and the on-air screen resumes. In
such a case, press S, O or o.
Example:
Playback search when jump interval is set to 15 MIN jumps.
Taking for instance, you want to start jump search 40 minutes after
the beginning of the program. Pressing
JUMP –
or
JUMP +
will
result in a jump to the scene at the 30 minutes point or 45 minutes
point respectively as illustrated below. At the subsequent press, the
scene will jump to the 15 minutes point or 1 hour point respectively,
according to the selected time interval, which in this case is
A
15 MIN
B
.
NOTE:
Jump search cannot be performed with finalized DVD-R/DVD-RW
(video mode) discs.
Resume Function
It is possible to memorize the position where you stop playback
and resume playback from that position.
Be sure to set ARESUMEB to AONB or ADISC RESUMEB.
(A pg. 71)
Resume function always works for DVD-R/DVD-RW discs that
have not been finalized and DVD-RAM regardless of the setting
of ARESUMEB.
1 Press o during playback to memorize a resume point.
The unit enters Resume Stop mode and memorizes the
position where you have stopped playback as a resume point.
(The inside of the disc status indicator on the front display panel
blinks while memorizing.)
The unit retains a memory of the resume points of the last 30
discs played back, even though they have been ejected if
ARESUMEB is set to ADISC RESUMEB. (A pg. 71)
To clear the resume points:
(The inside of the disc status indicator stops blinking and
lights.)
When ARESUMEB is set to AONB:
Press A to turn off the unit.
Press M to take out the disc.
Press o in stop mode.
Press TOP MENU
to display the top menu, then start playback
by selecting an item, etc.
Press MENU to display the disc menu, then start playback by
selecting an item, etc.
When ARESUMEB is set to ADISC RESUMEB:
•Set ARESUMEB to AOFFB. (A pg. 71)
Press
o in stop mode.
Press TOP MENU
to display the top menu, then start playback
by selecting an item, etc.
Press MENU to display the disc menu, then start playback by
selecting an item, etc.
2 Press I in stop mode to resume playback. The unit starts
playback from the resume point.
NOTES:
ADISC RESUMEB setting works on DVD VIDEO, VCD, SVCD and
already finalized DVD-R/DVD-RW (video mode) discs. For other
types of discs, the function under AONB setting will be applied
even if ARESUMEB is set to ADISC RESUMEB. (A pg. 71)
If you stop the playback of a disc for which a resume point has
already been memorized, the memory will be updated with the
new resume point.
After the unit has memorized the resume points for 30 discs,
remembering a new resume point will cause the unit to delete the
oldest memorized point. Stopping playback of a disc for which a
resume point is already stored may change the order in which the
points are stored. This may potentially change the order in which
points are deleted.
When the unit memorizes a resume point for a disc, it also
remembers audio language, subtitle and angle settings.
This function may not work for some Video CD/SVCDs.
When ARESUMEB is changed to AONB or AOFFB (A pg. 71),
resume points of the discs memorized with ARESUMEB set to
ADISC RESUMEB will be cleared.
Resume points are memorized for each side of a double-sided
disc.
When you switch to HDD while playing back JPEG/MP3 files,
playback stops. The Resume Function doesn’t work when you
switch to DVD thereafter to playback the disc.
Time counter
Beginning of program
Current scene
End of program
0 min
30 min
1 h
40 min
1 h 15 min
15 min
45 min
DVM70S_00.book Page 26 Friday, May 6, 2005 12:06 PM