Filter
Top Products
Filename [DVM70S_07HDD Operation.fm]
Masterpage:Left+
38 EN
BASIC OPERATIONS ON HDD DECK
Page 38 Friday, 6 May 2005 12:06
Instant Timer Recording (ITR)
This easy method lets you record for 30 minutes to 6 hours
(selectable in 30-minutes interval), and shuts the unit off after
recording is finished.
1 Press R on the unit to start recording.
2 Press R again to engage the ITR mode.
● On the front display panel, A0:30B appears.
3 If you want to record for more than 30 minutes, press R to
extend the time. Each press extends recording time by 30
minutes.
NOTES:
● You can only perform ITR using the R button on the unit.
● When the recording capacity becomes full during timer recording
or Instant Timer Recording, the unit is automatically shut off.
Watch Another Program While Recording On The Unit
While recording is going on, you can watch another program on the
TV. It does not interfere with recording.
1 Turn on the TV.
2 Select the desired channel to watch on the TV using your TV’s
remote control.
Elapsed Recording Time And Disc Remaining Time
Indication
During recording, press DISPLAY on the remote control or the unit
repeatedly until the desired indication appears on the front display
panel.
● Each time you press DISPLAY, the time indication changes as
follows:
Elapsed recording time N Disc remaining time N Clock N (Back
to the beginning)
● You can also check the disc remaining time by pressing REMAIN
while the unit is stopped or recording is in progress. The list of
disc remaining times for all recording modes appears on the TV
screen.
Second Audio Recording
This unit’s built-in MTS decoder enables reception of Multichannel
TV Sound broadcast. To record a SAP program received, set A2ND
AUDIO RECORDB to AONB. (A pg. 72)
NOTES:
When the channel is changed on the unit;
● The AMONOB indicator appears on the screen for about 5
seconds if the program is a monaural broadcast.
● The ASTEREOB indicator appears on the screen for about 5
seconds if the program is a stereo broadcast.
● Both ASTEREOB and ASAPB indicators appear when a stereo
program is accompanied by SAP sound.
● Both AMONOB and ASAPB indicators appear when the main audio
on the monaural broadcast is accompanied by SAP sound.
Recording Features
● Turn on the unit.
● Turn on the TV and select the AV mode.
● Slide the TV/CABLE/DBS/DVD switch to DVD.
● Press DV/HDD/DVD on the unit repeatedly or HDD on the
remote so that the HDD lamp lights up on the unit.
TV / VIDEO
REMAIN
DISPLAY
HDD
CABLE/DBS
DVDTV
CH +/-
DV/HDD/DVD
R
DISPLAY
CH +/-
HDD lamp
DVM70S_00.book Page 38 Friday, May 6, 2005 12:06 PM