Filter
Top Products
CONTROLLING YOUR TV WITH THE VCR'S REMOTE
42
automatically rewind to the beginning. After that, the VCR will eject the tape and turn itself to
off.
NOTES:
• The tape will not auto-rewind during timer recording or Instant Recording Timer.
• When the Counter Memory is activated, the tape will rewind to the MO:00:00 and the VCR
will be in the Stop mode.
CONTROLLING YOUR TV WITH THE VCR'S REMOTE
This Hitachi remote control can be used with your TV as well as the VCR, as long as your TV
comes with a remote control. This feature comes in handy - you don't have to juggle two
remotes.
The remote control is compatible with the fifteen makers of TVs listed below--but don't be
alarmed if yours is not on our list. You may still be able to program the remote for your TV.
Every TV that comes with a remote control is set up to detect certain infrared signals. You
need to program the VCR's remote control to send signals that your TV will recognize and
respond to. Here's what to do:
Compatibility
· The remote control is designed to be operated with many televisions and cable converters,
but will not work with every one made. If your TV or cable box does not respond the way it
should when you program if as explained follows, this remote may be incapable of operating it.
· Once you have programmed the remote, you won't have to do it again until you change the
batteries.
REMOTE CONTROL OF THE TV
PROGRAMMING THE REMOTE CONTROL OF THE TV
1 Turn on the TV
Turn on the TV (any channel is okay).
2 Program the remote control
Aim the VCR's remote control at your TV set. Hold down the TV button (not the VCR/TV
button) while you press the number corresponding to your brand of television as shown in the
chart.
For example; If you have an RCA television, press the TV and 0 at the same time. If this button
combination sends a signal that matches with your TV, the channel will change on the TV, and
you'll know the remote is set to control the television.
NOTES:
· If that button combination does not change the TV channel, go through the whole list of
button combinations one by one until you find one that does change your TV channel.
· Also, if your brand of TV is not listed in the chart, try all the number buttons. One of them may
work for you.
· If the TV channel still doesn't change after going through all the button combinations listed, it
is likely that you will not be able to program this remote control for your TV.