Filter
Top Products
AUTOMATIC TIMER RECORDING
32
Press the PLAY/
or STOP/ button repeatedly until your desired channel number appears.
(Example: 16)
Then, press the F.FWD/
button.
10 Set the tape speed
Press the PLAY/ or STOP/ button until the desired tape speed appears. (Example: SP)
· "AUTO" is available only with Program No. 1.
The AUTO mode starts recording in SP mode. The internal circuit compares the rest of the
program against the available tape length. If the internal circuit determines that the available
tape is not long enough to record the program in the SP mode, the Recording mode is
automatically changed to SLP mode. This will assure coverage of the desired timer program
before the end of the tape is reached. See "Just-In-Time Recording" on page 32 for the use of
"AUTO" setting.
11 Finish setting the program
Press the F.FWD/ button. Program 1 is now completed.
• To set another program, repeat steps [2] to [11].
• Press MENU button on the remote control to return to original mode.
12 Set the timer
Press the POWER button to turn off. The " " indicator appears on the display.
• Please see "HINTS FOR TIMER RECORDING" on page 31 for more notes.
TO CORRECT AN AUTOMATIC TIMER PROGRAM
1) Turn the power on and press VCR/TV button on the remote control so that the "VCR"
indicator appears on the display.
2) Repeat steps [1] to [3] on page 24.
3) Go to the digit you want to change by using the F.FWD/ button or /REW button.
4) Enter correct numbers using /PLAY or /STOP button.
5) Press MENU button on the remote control to return to original mode.
6) Press POWER button to return to timer stand-by mode.
TO STOP A STARTED AN AUTOMATIC TIMER PROGRAM
Press STOP/EJECT button on the VCR.
NOTE: STOP button on the remote control will not function in the Automatic Timer Recording
mode.
TO CANCEL OR CHECK THE START/END TIME
1) Turn the power on and press VCR/TV button on the remote control so that the "VCR"
indicator appears on the display.
2) Press MENU button on the remote control.
3) Select a program number you want to check using /PLAY or /STOP button. The
details of selected program appears on the TV screen.
You may cancel the entire program by pressing
/REW button.
4) Press MENU button on the remote control to return to original mode.