Filter
Top Products
OPERATING CONTROLS AND FUNCTIONS
12
13. REC(ORD) button- Press to begin manual recording.
IRT button- Press to activate Instant Recording Timer. (only on the VCR)
14. VOLUME buttons- Press to adjust the desired TV's volume level by using either or
button.
15. MODE SELECT buttons
· CATV button- For details, see page 36.
· TV button- For details, see page 36.
· VCR button- For details, see pages 36.
16. NUMBER buttons- Press to select desired channels for viewing or recording. To select
channels from 1 to 9, first press "0" button then 1 to 9.
100/ENT button- When selecting cable channels which are more than 100, press this button
first, then press the last two digits. (To select channel 125, first press "100/ENT" button then
press "2" and "5").
17. MENU button- Press to display the menus on the TV screen. Press to exit the menus on
the TV screen. (only on the remote control)
18. DISPLAY button- Press to display the counter or the current channel number and the
current time on the TV screen. (only on the remote control)
19. SLOW button- Press to reduce the playback speed. Slow speed can be controlled by
pressing the F.FWD button (faster) or the REW button (slower).
20. MUTE button- Press to mute the TV's sound. Press it again to resume the sound.
21. COUNTER MEMORY button- Press to set counter memory on and off.
22. COUNTER RESET button- Press to reset counter to 0:00:00.
Press to ad or delete channel numbers during channel preset.
23. VCR PLUS+ button - Press to program the automatic timer recording using the VCR Plus+
system.
24. Cable box transmitters - Send signals to cable converter box.
25. Power cord- Connect to a standard AC outlet (120V/60Hz).
26. AUDIO OUT jack- Connect to the audio input jack of your audio equipment or another
VCR.
27. AUDIO IN jack- Connect to the audio output jack of your audio equipment or another VCR.
28. ANT. IN terminal- Connect to an antenna, Cable system or Satellite system.
29. VIDEO OUT jack- Connect to the video input jack of your video camera or another VCR.
30. VIDEO IN jack- Connect to the video output jack of your video camera or another VCR.
31. CH3/CH4 selector switch- Use to select a video output channel (3 or 4) for playback from
your VCR.
32. ANT. OUT terminal- Connects to the antenna input terminal on your TV.