Filter
Top Products
TRACKING ADJUSTMENT
22
Just press the PLAY button on the VCR. Power will automatically turn on and playback will
start. (Direct Button Operation)
2B) Using button on the remote control
Press the POWER button to turn on the VCR, and then press the PLAY button on the remote
control.
3 To stop playback
Press the STOP button.
PICTURE SEARCH
This feature is very useful in finding or skipping over a particular scene on a tape. In this mode,
the sound will be muted.
1) You may view a video tape at a high speed in either a forward or reverse direction by
pressing the F.FWD or REW button. (in the SP / LP / SLP modes)
2) Depress it again, the VCR will now search in super high speed. (in the LP / SLP modes
only)
3) Press the PLAY button to return to normal speed.
STILL PICTURE
You can view a still picture on the TV screen during playback (the Still mode). Press the
PAUSE button on the remote control during playback. Press the PLAY button to return to
playback.
NOTES:
· You can advance the picture by one frame at a time by pressing the PAUSE button on the
remote control during the still mode.
· If it is left in the Still mode for more than five minutes, the VCR will automatically switch to the
Stop mode.
VERTICAL HOLD CONTROL
When the picture begins to vibrate vertically, stabilize the picture by pressing CHANNEL
or
button in the Still mode.
NOTES:
· When the picture is distorted or rolling vertically, adjust vertical hold control on your TV.
· Some newer TV's do not have a user adjustable vertical hold control.
TRACKING ADJUSTMENT
• Tracking adjustment will be set automatically (Digital Tracking function) when you start
playback.
• When playing pre-recorded tapes or tapes recorded on units other than your own, noise lines
(black and white streaks) may appear on the playback picture. If this occurs, you can adjust
the tracking control manually by pressing the CHANNEL
or button on the VCR until the
streaks disappear.
To return to the DTR function, stop the tape once and start playback again.
To set center position, press both CHANNEL and button at the same time.