Filter
Top Products
COUNTER MEMORY
23
NOTE: This function is controlled only by the buttons on the VCR. The buttons on the remote
control will not adjust tracking.
• You can reduce the noise lines by pressing the CHANNEL(CH) or button in slow
mode, too. Slow tracking adjustment will not be set automatically.
NOTE: In Still mode, press the SLOW button and press the CHANNEL(CH) or button
until the streaks disappear. To return to Still mode, press the PAUSE button again.
SLOW MOTION
Press the SLOW button to reduce the playback speed. The VCR mutes the sound during slow
motion. You can control the speed by pressing the F.FVM button (faster) or the REW button
(slower).
Press the PLAY button to return to normal playback.
NOTE: If it is left in the Slow mode for more than five minutes, the VCR will automatically go
into the Stop mode.
COUNTER MEMORY
This feature can be used to memorize the beginning point that you want to review. And you
can search it easily by rewinding or fast forwarding.
Make sure...
• Insert a prerecorded tape.
1 Stop tape at your desired point
Rewind or fast forward the tape to the beginning point at which you want to review.
2 Reset the counter to 0:00:00
Press the COUNTER RESET button on the remote control once or twice.
3 Select the Counter Memory mode
Press the COUNTER MEMORY button on the remote control until "M" appears on the TV
screen.
4 Begin recording or playback
Press RECORD or PLAY button.
Press the STOP button when recording or playback is completed.
5 To activate the Counter Memory
Press DISPLAY button on the remote control so that the counter appears on the TV screen.
Press the REW (or F.FWD) button. The VCR will stop automatically when the counter has
returned to approximately 0:00:00. (approx.)
NOTE: If the counter is not displayed, the Counter Memory will not be activated.
TO EXIT THE COUNTER MEMORY
When the counter appears on the TV screen, press COUNTER MEMORY button on the