Filter
Top Products
SETTING THE GUIDE/USER CHANNELS FOR THE VCR PLUS+ SYSTEM
34
TO CHECK A PAIR OF CHANNEL NUMBERS
A list of all the GUIDE CH. numbers and corresponding USER CH. numbers memorized by the
VCR is displayed on the TV screen.
1 Select "INITIALIZE"
Press MENU button repeatedly so that the INITIALIZE menus appears.
2 Select "GUIDE CHANNEL MAP"
Press /PLAY or /STOP button repeatedly to point to "GUIDE CHANNEL MAP".
Then, press F.FWD/ button.
• If the channel you wish to check is not on the screen, press F.FWD/ button to change the
displayed page until you reach the correct page.
3 To return to TV mode
Press MENU button.
TO CORRECT A PAIR OF CHANNEL NUMBERS
1) Press MENU button repeatedly so that the INITIALIZE menu appears.
2) Press /PLAY or /STOP button repeatedly to point to "GUIDE CHANNEL SET". Then,
press F.FWD/ button.
3) Enter the correct guide channel number using the number buttons or /PLAY or /STOP
button.
Then, press F.FWD/ button.
4) Enter the correct user channel numbers using the number buttons or /PLAY or /STOP
button.
Then, press MEMORY button.
5) Press MENU button to return to original mode.
TO CANCEL A PAIR OF CHANNEL NUMBERS
1 Select "INITIALIZE"
Press MENU button repeatedly so that the INITIALIZE menu appears.
2 Select "GUIDE CHANNEL MAP"
Press /PLAY or /STOP button repeatedly to point to "GUIDE CHANNEL MAP".
Then, press F.FWD/ button.
3 Select the channel you want to cancel.
Press /REW button. A pair of numbers flash.
Then, press /PLAY or /STOP button until the pair of numbers you want to cancel flash.
• If the channel you wish to cancel is not on the screen, press F.FWD/ button to change the
displayed page until you reach the correct page.
4 Delete it from memory
Press
/REW button.
• If you want to cancel another channel, repeat steps [3] to [4].
5 To return to TV mode
Press MENU button.