Filter
Top Products
INDEX SEARCH
25
2 Select "VCR SET UP"
Press the MENU button on the remote control repeatedly so that the VCR SET UP menu
appears.
3 Select "RENTAL"
Press the PLAY/ or STOP/ button repeatedly to point to "RENTAL".
4 Select "RENTAL" to [ON]
Press the F.FWD/ button so that "RENTAL ON" appears.
NOTES:
• Once you select the Rental mode, it stays in effect even after you turn off the VCR.
• To stop playback, press the STOP button.
TO EXIT THE RENTAL PLAY MODE
Repeat steps [1 ] to [3]. Then press the F.FWD/
button so that "RENTAL OFF" appears on
the TV screen.
INDEX SEARCH
This feature provides a method of indexing the starting point so that it can be easily returned to
in either fast forward or rewind mode.
· The index mark will be made automatically when the REC button is pressed. It will also be
marked at the starting point of Timer recording, IRT.
· The index mark will not be recorded if the PAUSE button on the remote control is pressed
and released during recording.
· The time gap between making the index marks on the tape should be greater than 1 minute
for SP recording, 2 minutes for LP recording and 3 minutes for SLP recording.
Example: You are watching program number 4 and want to fast forward to program number 7.
You must skip three programs.
1 Select "SEARCH SELECT"
Press the MENU button on the remote control repeatedly so that the SEARCH SELECT menu
appears.
2 Select "INDEX SEARCH"
Confirm "INDEX SEARCH" is pointed. Then, press the F.FWD/ button.
3 Enter your desired number
Press the PLAY/ or STOP/ button until the number of programs that you want to skip
appears.
(Example: "03" for 3 programs)