Filter
Top Products
TIME SEARCH
26
4 Begin Index Search
Press the REW or F.FWD button. The VCR begins rewinding or fast forwarding to the
beginning of desired program.
NOTE: Every time an index signal is skipped, the number in the program indicator decreases
by one.
5 After Index Search
When the preset program is reached, the VCR will start playback automatically.
NOTES:
• Index Searches can be set up to 20.
• This function will not operate in the recording mode.
• Procedures must be followed within 30 seconds, from steps [2] to [3]. Otherwise the Index
Search mode will be cancelled.
• To exit the Index Search mode, press the MENU button on the remote control after step [3].
Or press the STOP button after step [4].
• A video cassette must be inserted in the VCR for this function to work.
TIME SEARCH
The Time Search function makes it possible to quickly advance the tape to your desired
position simply by entering the exact amount of playback time you want to skip.
Example: To watch a program after 2 hours and 50 minutes from the present position, in
either direction.
1 Select "SEARCH SELECT"
Press the MENU button on the remote control so that the SEARCH SELECT menu appears.
2 "TIME SEARCH"
Press the PLAY/ or STOP/ button to point to "TIME SEARCH".
Then, press the F.FWD/
button.
3 Enter your desired time
Press the PLAY/ or STOP/ button repeatedly until your desired time appears. ( Example:
"2:50" stands for 2 hours 50 minutes)
4 Begin Time Search
By pressing the REW or F.FWD button. The VCR begins rewinding or fast forwarding to the
specified point.
The time counts down as the searching progresses.
5 After Time Search
Playback starts automatically when 0:00 is reached.
NOTES:
• Time Search can be set up to a maximum of 9 hours 59 minutes (9:59).
• This function will not operate in the recording mode.
• Procedures mist be followed within 30 seconds, from steps [2] to [3]. Otherwise the Time
Search mode will be cancelled.