Filter
Top Products
65
Playing back
The R-09HR can apply reverb effects to the song being played.
Such reverberation simulates the experience of being in a hall or on stage.
REVERB is an effect that can be used to, for example, make it seem as if the sound were being played in a
large hall.
• Sounds with applied reverb cannot be recorded. Reverb cannot be applied while monitoring
recordings.
• The reverb effect cannot be applied to the playback of songs with a sampling frequency of 88.2 kHz
or 96 kHz.
1.
Press the [REVERB Button].
Set the reverb type. Various spaces can be simulated by changing the settings.
1.
Press the [REVERB Button] for a number of
seconds.
The types of reverb are displayed.
2.
Change the reverb type.
Press the [PREV button ] and [NEXT button ] while the
reverb type is displayed to change the reverb type.
Applying reverb effects during playback
Applying reverb effects
Reverb type
Type
Effect
HALL1
This reverb effect simulates the reverberation in a concert hall.
A mild reverberation with a long, spreading sound is obtained.
Hall 2 has shorter reverberation than Hall 1.
HALL 2
ROOM
This reverb effect simulates the reverberation in a room.
A short, bright reverberation that simulates a live stage is obtained.
PLATE
This reverb effect simulates plate reverberation (a reverberation unit using vibrations
from metal plates).
A metallic-sounding reverberation with an extended high range is obtained.
Hold down
Show
Reverb type
Change
the value
HALL1 HALL2 ROOM PLATE
R-09HR_e.book 65 ページ ２００７年１２月１７日 月曜日 午後２時１６分