Filter
Top Products
45
Recording
The R-09HR is designed to record a wide variety of sounds, but it can also make high-quality
recordings when a recording level (volume) appropriate for the sound to be recorded is set.
Level settings should be the highest input level (volume) that has no distortion. This principle
is the same for both the [Internal Microphone] and external microphones.
1.
Point the microphone used for recording.
Point the R-09HR microphone toward the target for recording.
fig.rec-st-e.eps_80
2.
Enter recording-standby mode.
Press the [REC Button] while the <Main Screen> is
showing. The [REC Indicator] blinks. The unit is in
recording-standby mode.
Recording has not started when in this state.
fig.inputlevel-test-e.eps_80
3.
Play the song to record into the
microphone.
The level meter indicates the loudness of the input to R-
09HR.
fig.inputlevel-e.eps_80
4.
Adjust the volume.
Adjust the input volume gradually by pressing the [Input
Level Button] while the sound is playing.
Adjusting recording levels
Recording
standby
Low
Volume
High
R-09HR_e.book 45 ページ ２００７年１２月１７日 月曜日 午後２時１６分