Filter
Top Products
43
Recording
5.
Set the type of microphone being used.
Set the [PLUG-IN POWER Switch] to the type of microphone connected to the [MIC
Input Jack].
• When connecting a dynamic microphone or a battery-powered microphone, be sure to use the
[PLUG-IN POWER Switch] to set to off. Damage may result if the wrong setting is used.
• If a cable is connected to the [LINE IN Jack], then no sound is input through the [MIC Input Jack].
Dynamic microphone
The durable dynamic microphone is suitable for vocal or instrumental recordings. It does not
require a power supply.
Condenser microphone
The sensitive condenser microphone is suitable for recording quiet sounds such as live instrumentals
or meetings. It requires a power supply from either batteries or plug-in power.
Only the L channel is recorded if a monaural microphone is used when the external microphone
type is set to stereo. When set to monaural, the same sound (stereo) is recorded to the L and R
channels.
6.
Connect the microphone.
Connect a microphone to the [MIC Input Jack] on the R-09HR.
To monitor the sound while recording, connect headphones to the [HEADPHONE jack]. Feedback
may occur when external speakers are connected, so please do not use speakers.
7.
Adjust the input level.
Adjust the volume for the recorded sound.
Follow the procedures in “Adjusting recording levels” (p. 45) to adjust the level.
Dynamic microphone
Switch OFF the [PLUG-IN POWER Switch] on the back.
Condenser microphone powered
by self-contained battery
Plug-in powered condenser
microphone
Switch ON the [PLUG-IN POWER Switch] on the back.
Stereo
Use the <Menu Screen> to set the external microphone type to stereo (p. 101).
Monaural
Use the <Menu Screen> to set the external microphone type to monaural (p. 101).
R-09HR_e.book 43 ページ ２００７年１２月１７日 月曜日 午後２時１６分