Filter
Top Products
24
Using the R-09HR
Point the remote control toward the R-09HR’s sensor, and operate it within the specified
operating range.
fig.remote02-e.eps
• The Remote Control cannot perform operations from two buttons at the same tie.
• Even if the Remote Control is within the operating range, operation may not be possible
because of obstacles or a bad angle.
• Malfunction may occur if used near a device that emits infrared light or if another infrared
remote control is used.
• Battery life varies according to use. As the batteries become low, the operating range
becomes limited. Please replace the batteries if this occurs.
• If you won’t be using the remote control for a long period of time, you should remove the
batteries.
• The response of the remote control may be affected if a strong light, such as a spot light, is
shined at the remote sensor.
• Operations from remote control can be blocked. (
➜
p. 104)
Using the remote control
Precautions concerning use of the remote control
Remote control operating range
Distance: 4 meters
Angle: 30 degrees or less to the
left and right of the receiver.
Remote sensor
Transmitter
R-09HR_e.book 24 ページ ２００７年１２月１７日 月曜日 午後２時１６分