A SERVICE OF

logo

3-31
Catalyst 2955 Hardware Installation Guide
78-14944-03
Chapter 3 Installation
Connecting the Switch to the Power Converter
Step 1 Position the power converter directly in front of the DIN rail, making sure that the
top of the DIN rail clip meets the top of the DIN rail, as shown in Figure 3-13.
Figure 3-13 Mounting the Power Converter on a DIN Rail
Step 2
Rotate the power converter down toward the DIN rail until the release tab on the
rear panel clicks.
Step 3 Press down lightly on the top of the power converter to ensure that it is firmly
locked in place.
1 DIN rail clip 3 Clip release tab
2 DIN rail
97326
1
2
3