A SERVICE OF

logo

Chapter 3 Installation
Wiring the External Alarm Device Relays
3-50
Catalyst 2955 Hardware Installation Guide
78-14944-03
Caution Do not overtorque the power and relay connector captive screws. The
recommended maximum torque is 4.5 in-lbs.
Figure 3-24 Torquing the Power and Relay Connector Captive Screws
Step 5
Repeat Step 1 through Step 4 to insert the input and output wires of an additional
external alarm device into the two connections labeled A2.
1 Power and relay connector captive screws
104923
RT
A1
A2
VB
VA
A1
A2
RT
RT
A1
A2
VB
VA
A1
A2
RT
1