A SERVICE OF

logo

4-19
Catalyst 2955 Hardware Installation Guide
78-14944-03
Chapter 4 Installation in a Hazardous Environment
Verifying Switch Operation
Figure 4-2 Stripping the Ground Wire
Step 3 Insert the ground wire into the ring terminal lug, and using a crimping tool, crimp
the ring terminal to the wire.
Figure 4-3 Crimping the Ring Terminal
Step 4
Slide the ground screw through the ring terminal.
Step 5 Insert the ground screw into the functional ground screw opening on the front
panel.
1 0.5 inch (12.7 mm) ± 0.02 inch
(0.5 mm)
3 Wire lead
2 Insulation
104908
2
1
3
76666