A SERVICE OF

logo

Open as PDF
next previous
4-41
Catalyst 2955 Hardware Installation Guide
78-14944-03
Chapter 4 Installation in a Hazardous Environment
Installing the Switch on a DIN Rail
Figure 4-19 Mounting the Switch on a DIN Rail in a Face-Down Position
Step 2
Rotate the switch down toward the DIN rail until the release tab on the rear panel
clicks.
Step 3 Lift lightly on the bottom of the switch to ensure that it is firmly locked in place.
After the switch is mounted on the DIN rail, power on the switch as described in
the “Powering On the Switch and Running POST” section on page 4-16.
1 DIN rail clip 3 DIN rail clip release tab
2 DIN rail
104571
1
2
3