A SERVICE OF

logo

3-21
Catalyst 2955 Hardware Installation Guide
78-14944-03
Chapter 3 Installation
Verifying Switch Operation
Step 6 Use a ratcheting torque flathead screwdriver to torque the power and relay
connector captive screws (above the installed wire leads) to 4.5 in-lbs. (72
ozf-in.). (See Figure 3-8.)
Caution Do not overtorque the power and relay connector captive screws. The
recommended maximum torque is 4.5 in-lbs.
Figure 3-8 Torquing the Power and Relay Connector Captive Screws
1 Power and relay connector captive screws
97486
RT
A1
A2
VB
VA
A1
A2
RT
1