A SERVICE OF

logo

Chapter 4 Installation in a Hazardous Environment
Installing the Switch on a DIN Rail
4-38
Catalyst 2955 Hardware Installation Guide
78-14944-03
The switch ships with the clip assembly installed on the rear panel for a parallel
mounting position, as shown in Figure 4-16. To mount the switch in a face-down
position, remove the clip assembly from the rear panel, and install it on the top of
the switch, as shown in Figure 4-17.
Figure 4-16 Catalyst 2955 Switch Rear Panel Clip Mounting
1 Catalyst 2955 switch rear panel 3 DIN rail clip mounting screws
2 DIN rail clip assembly
104560
3
2
1