Filter
Top Products
42
EN
Power Sources
Operating with the AC Power Adaptor or
Car Battery
Tips
• When the AC power
adaptor or the car
battery cord is
connected to the DC IN
4.5V jack of the tape-
corder, the internal
batteries are
automatically
disconnected. Power is
automatically supplied
from the external
power source.
• When the AC power
plug or the car battery
cord is used for an
extended period of
time, the internal
temperature of the
recorder may rise. This
is not a malfunction.
• If the unit is in the stop
mode for more than 10
minutes while using
the house current or a
car battery. The set
functions will be
canceled and the tape
will be unloaded for
tape protection.
Using the AC power adaptor
Connect the supplied AC power adaptor to the DC IN
4.5V jack.
Notes on the AC power adaptor
• Use only the supplied AC power adaptor or the
optional AC-E45HG. Do not use any other AC
power adaptor.
• Make sure that the cassette compartment lid is
closed before disconnecting the AC power adaptor
or removing the batteries. The cassette compartment
lid may not close if the power source is
disconnected or removed while the cassette
compartment lid is open. In this case, connect the
power adaptor or insert the batteries again.
Using the car battery
To operate the tape-corder with the car battery,
connect the car battery cord Sony DCC-E245 (not
supplied) to the DC IN 4.5V jack of the tape-corder.
For more details, refer to its Operating Instructions
manual.
to DC IN 4.5V
AC power adaptor (supplied)
Polarity of the plug