Filter
Top Products
10
EN
Location of Controls
Tape counter display
Each time the COUNTER button is pressed (on the
remote control, the COUNTER MODE button), the
display changes as follows:
Example: indication on the main unit
Tape counter (normal display)
Absolute time (absolute time
from the beginning of the tape)
Remaining time of the tape
To reset the tape counter (normal display) to
“0H00M00S”
Press the RESET button on the main unit when the tape
counter is displayed.
Remaining time of the tape
The remaining time of the tape appears normally after
about 16 seconds of commencing playback in the SP
mode. However, there may be a deviation in the
amount of time displayed depending on the tape.
-dB-
Location of Controls (continued)
Using the display
Day/AM/PM indicator
Tape counter/clock indicator,
function setting display
Note
The tape counter is
provided as a visual
guideline and is not a
clock. The value
displayed in the counter
is not an accurate
depiction of the actual
time. Therefore, do not
use the tape counter as a
clock.
Remote control
Main unit
Day/AM/PM indicator
Tape counter/clock indicator