Filter
Top Products
41
EN
Power Sources
Low-power Consumption Mode
If the recorder remains in
the stop mode for 3
minutes* or longer, it will
enter the low-power
consumption mode
automatically to conserve
the battery.
* The unit will enter the
low-power
consumption mode
when the cassette
holder is open for
about 30 seconds.
When the CLOCK
button, etc., is pressed
during a low-power
consumption mode, the
unit will re-enter the
low-power
consumption mode in
about 30 seconds.
Note
A digital cable connected
to the REMOTE •
DIGITAL I/O jack will
increase battery
consumption. Unplug it
when it is not used.
When the unit automatically switches to the low-
power consumption mode
The tape unloads automatically to protect the tape and
the recorder enters the low-power consumption mode
to conserve the battery when the tape-corder is in the
stop mode for 3 minutes* or longer. In the low-power
consumption mode, the display changes to the clock
and the backlight turns off. On the remote control the
display is turned off.
To enter the low-power consumption mode
manually
1 Make sure that the recorder is in the stop mode.
Press the p STOP button if the tape-corder is in the
pause mode.
2 Slide the HOLD switch on the main unit to show
the yellow hold mark.
The recorder enters the low-power consumption
mode.
When you press a button “HOLD” will flash for a
few seconds in the display.
p STOP
HOLD
Power Sources