Filter
Top Products
Recording
Recording
23
EN
Connecting with Other Equipment for
Recording
You can connect the recorder to other analog audio equipment or audio equipment
with digital output. Refer to page 16 for “Recording”.
( Recording
Recording from analog audio
equipment with a LINE OUT jack
(Analog connection)
1 Set the MIC/LINE IN switch to LINE IN.
2 Select the recording mode using the MANUAL •
MIC LIMITER • AUTO (AGC) selector.
MANUAL: adjust recording level manually (see
page 25)
AUTO (AGC): recording level will be adjusted
automatically
3 Select sampling frequency using the SP • LP
switch.
SP (48kHz, 44.1kHz): normal recording mode.
LP: long continuous recording mode. Sampling
will be done by 32kHz. (see page 27)
4 Press the r REC and P PAUSE buttons.
5 Press either the ( PLAY or P PAUSE button to
begin recording. Then, begin playback of the
connected source.
Stereo unit
or mixer,
etc.
to MIC/LINE IN
to LINE OUT
Audio connecting cable
RK-G129
(not supplied)
PCM-M1
Tip
When recording with
analog connection, you
can adjust the digital copy
code (ID 6) (see page 28).
Playing back / Recording