Filter
Top Products
13
EN
Make sure that the tape-corder is in the stop mode and that the HOLD function is off.
1 Press CLOCK/SET for 2 seconds
or longer.
2 Press CLOCK/SET again while
”
” is present in the
display.
3 Press + or – button to set the
current year, then press the
CLOCK/SET button.
4 Repeat step 2 to set the current
month, date, hour, minute. For
seconds, pressing + or – will set it
to “00”. Then press the CLOCK/
SET button.
The display stops flashing and
the clock operates.
CLOCK/SET
+–
– +
CLOCK/SET
Setting the Clock
Set the clock before starting any
recording operations to stamp
the date and time. Otherwise,
you cannot get the correct date
and time.
The clock will return to its
default setting (SA/97Y11M
1D/AM12H00M00S) if the
batteries are removed from the
unit for a long time. In this case,
set the clock again.
Setting the Clock
To quit the clock setting
Press the p STOP button. The clock display will
return to the previous clock setting. However, if the
date is set , the year, month and date will be set and
will not be applicable for further cancellation.
Tip
To set the clock accurately,
press CLOCK/SET at the
time of the tone in step 4.
CLOCK/SET
–
+
HOLD
CLOCK/SET
Inserting the Batteries / Setting the clock