Filter
Top Products
Recording
Recording
33
EN
Note
Start IDs cannot be
written while is
flashing rapidly during
the Rehearsal function.
2 Press RESET • + or COUNTER
• – repeatedly and select ”LEV
SID”.
3 Press CLOCK/SET.
4 Press RESET • + or COUNTER • – repeatedly and
select the threshold value of your choice. With
each press, the display will change as follows.
5 Press CLOCK/SET.
The display returns to the clock.
Writing Start IDs during playback
You can write a Start ID anywhere you want without
erasing the contents of the existing recording.
1 Press the START ID • MODE button on
the main unit repeatedly until “AUTO ID” appears
(to go into the auto mode) or disappears (to go into
the manual mode).
2 Press the START ID • ENTER button during
playback where you want to rewrite.
“REHRSAL” flashes when
you select the point for
Start ID. The recorder plays
back a 3 second segment
repeatedly, up to 16 times
(Rehearsal function).
-dB-
The current threshold
value and the peak
indication meter will
flash.
–
50
–
40
–
32
–
24
–
18
–
12
–
00
–
02
–
04
–
06
–
08