Filter
Top Products
93
Setting the clock format
The clock display used in standby mode and on the playing mode screens
can be set to 12 or 24 hour format. The selected format is then also used
when setting the alarms.
1. With your radio switched on, press and hold the Menu button to
access the menu for the current mode.
2. Press the Menu Up or Down buttons until 'System settings' is highlighted
on the display. Press the Select button to enter the system settings
menu.
3. Press the Menu Up or Down buttons until 'Time/Date' is highlighted
on the display. Press the Select button to enter the time setup.
4. Press the Menu Up or Down buttons until 'Set format' is highlighted on
the display. Press the Select button to enter the clock format menu.
The current clock display format is marked with an asterisk.
5. Press the Menu Up or Down buttons to select either 12 or 24 hour
format. Press the Select button to confi rm your choice of clock format.
The display will then revert to the previous menu.
If the 12 hour clock format is chosen, the radio will then use the 12 hour
clock for the setting of alarms, and will display a 12 hour clock with an AM
or PM indicator when in standby mode.
1
2-5
2-5
2-5