Filter
Top Products
If you need any further advice, please call our Technical Helpline on 020 8758 0338 (Mon-Fri)
62
DAB Radio
Dynamic Range Control settings
Dynamic Range Control (also known as DRC) can make quieter sounds
easier to hear when your radio is used in a noisy environment by reducing
the dynamic range of the audio signal.
1. Press the On/Standby button to switch on your radio.
2. Press the Radio button as needed to select DAB radio mode.
3. Press and hold the Menu button to enter the DAB menu.
4. Press the Menu Up or Down buttons until 'DRC' is highlighted on the
display.
5. Press the Select button to enter the DRC adjustment mode. The
current DRC setting will be indicated with an asterisk.
6. Use the Menu Up or Down buttons to highlight the required DRC
setting (the default is Off).
'DRC Off' - DRC is switched off, Broadcast DRC will be ignored.
'DRC high' - DRC is set as sent by broadcaster.
'DRC low' - DRC level is set to 1/2 that sent by broadcaster.
7. Press and release the Select button to confi rm the setting.
Note: Not all DAB broadcasts use the DRC function. If the broadcast
does not provide DRC information, then the DRC setting in the radio will
have no effect.
3
2
5,7
4,6 4,6