Filter
Top Products
69
Stereo / Mono switching
If the FM radio station being listened to has a weak signal, some hiss may
be audible. It is possible to reduce this hiss by forcing the radio to play the
station in mono rather than stereo.
1. Press the Radio button as needed to select the FM radio mode display
and tune to the required FM station as previously described.
2. Press and hold the Menu button to enter the FM menu.
3. Press the Menu Up or Down buttons until 'Audio setting' is highlighted
on the display. Press the Select button to enter the audio setting
mode.
The current setting is indicated with an asterisk.
4. To switch to mono in order to reduce the hiss from a weak FM signal
press the Menu Up or Down buttons until 'YES' is highlighted. Press
the Select button to confi rm the setting.
Alternatively, to return to the normal automatic 'stereo or mono' mode
press the Menu Up or Down buttons until 'NO' is highlighted. Press
the Select button to confi rm the setting.
5. Press and hold the Menu button to return to the normal FM mode
display.
2,5
1
3,4
3,4 3,4