Filter
Top Products
If you need any further advice, please call our Technical Helpline on 020 8758 0338 (Mon-Fri)
102
Setting up your My EQ profi le
If you fi nd the preset equaliser functions not to your liking, you may set up a
custom treble and bass setting as follows:
1. Follow steps 1-3 on the preceding page in order to enter the Equaliser
menu or alternativley press the EQ button on the remote control.
2. Press the Menu Up or Down buttons until 'My EQ profi le setup' is highlighted
on the display. Press the Select button to enter the adjustment mode.
3. To adjust the bass level press the Menu Up or Down buttons until 'Bass' is
highlighted on the display. Press the Select button to enter the adjustment
mode and press the Menu Up or Down buttons until the desired level
(between -14 and +14) is displayed. The sound will change as you adjust
the level. Press the Select button when you are happy with the bass
setting.
4. To adjust the treble level press the Menu Up or Down buttons until
'Treble' is highlighted on the display. Press the Select button to enter
the adjustment mode and press the Menu Up or Down buttons until the
desired level (between -14 and +14) is displayed. The sound will change
as you adjust the level. Press the Select button when you are happy with
the treble setting.
5. Press the Back button and the display will prompt you to save the changes.
If you wish to save the changes highlight 'YES'. If you do not wish to
save the changes highlight 'NO'. Press the Select button to enter the
selection.
6. To use the 'My EQ' profi le press the Menu Up or Down buttons until 'My EQ'
is highlighted, and then press the Select button to make the selection.
To quickly cancel the effect of the 'My EQ' profi le press the Menu Up or Down
buttons until 'Normal (Flat)' is highlighted on the display and press the Select
button to select. The treble and bass settings will be remembered for the next
time that you wish to use the 'My EQ' setting.
Display and Audio
2-6
2-6
2-6