The PhotoViewer
10
89
En
Note
• You can press HOME MENU to exit the PhotoViewer
screen while the recorder is reloading images. (If you
enter the PhotoViewer again, it will resume
reloading.)
Zooming the screen
During a slideshow you can zoom in to enlarge a portion
of the picture by a factor of two or four. You can also move
the area of the picture displayed.
1 During a slideshow, use the CHANNEL + button
to zoom the picture.
Repeated presses cycle between zoom off, 2x zoom and
4x zoom. The zoom factor is displayed on-screen.
2 Use the /// (cursor buttons) to move the
zoomed area within the picture.
Rotating the screen
You can rotate the displayed picture during a slideshow
so you can always view pictures the right way up,
whichever way they were taken.
• During a slideshow, press ANGLE to rotate the
displayed picture clockwise by 90º.
Press ANGLE repeatedly to continue rotating the picture
in increments of 90º.
2x Zoom
