Recording
06
48
En
• Timer recordings have higher priority than the Auto
Start Recording function (see Automatic recording
from a satellite tuner on page 54). A timer recording
will interrupt an Auto Start Recording. (Auto Start
Recording will resume after the timer recording has
finished.)
• Approximately two minutes before a timer recording
is set to start, the recorder will go into timer recording
standby. In timer recording standby you cannot use
some functions.
• The maximum length for timer recordings made to
the HDD is 24 hours. However, because one title is
limited to six hours, recordings over six hours will be
spread over two or more titles. Note that there will be
a break in the recording of a few seconds between
titles.
Easy Timer Recording
As the name suggests, Easy Timer Recording makes
setting up a timer recording as simple as possible.
1 Press EASY TIMER.
Alternatively, you can also access from the Home Menu
(press HOME MENU and select Timer Recording then
Easy Timer Recording).
2 Set the TV channel and recording quality.
• Use the CHANNEL +/– buttons to set the channel you
want to record.
• Use the REC MODE button to set the recording
quality. Press repeatedly to switch between FINE, SP,
LP, EP and AUTO (and MN if manual recording mode
is on).
• DVD recording: The AUTO option automatically sets
the best recording quality for the space available on
the disc loaded at the time of recording.
• HDD recording: The AUTO option automatically sets
the best recording quality that would fit on to a blank
DVD disc.
• Press DVD to record to DVD disc, or HDD if you want
to record to the hard disk drive.
3 Use /// (cursor buttons) to move the
cursor to the recording start date and time on the
grid.
• You can move the cursor forward or back an hour at
a time using the and buttons.
Each row of the grid is one day (you can set the timer
recording for up to a month in advance). Each column is
a 15 minute interval.
The darker area represents time that has already passed
and can’t therefore be selected. The lighter area is time
that’s available.
4 Press ENTER to set the start time.
The start date and time is displayed in the middle of the
screen.
DVD RECORDER
RETURN
HOME
MENU
EASY
TIMER
HDD DVD
ENTER
CHANNEL
REC MODE
ì
8:00 9:00 10:00 11:00 12:00 1:00 2:00
12/13
12/14
12/15
AM PM
12/13
MON AM
--:--
CHANNEL
+
/
–
REC MODE
FINE 32
HDD
HDD/DVD
Easy Timer Recording
9:30
8:00 9:00 10:00 11:00 12:00 1:00 2:00
12/13
12/14
12/15
AM PM
12/13 11:45
MON AM
- -:- -
FINE32
HDD
Easy Timer Recording
CHANNEL
+
/
–
REC MODE HDD/DVD
Recording start time
Current time