Filter
Top Products
Filename [MX1S_12Subsidiary.fm]
Masterpage:Left+
86 EN
SUBSIDIARY SETTINGS
Page 86Saturday, 30 October 2004 16:18
The VCR Plus+ programming system assigns a VCR Plus+ guide
channel to the TV channels and the cable channels. These guide
channel numbers are also called the VCR Plus+ channel codes.
Most TV listings have a section, usually a chart, indicating the
guide channel numbers assigned to each station.
To ensure that VCR Plus+ timer recording operates correctly, it is
necessary to set the “VCR Plus+ Guide Channel” for each station.
If you have moved to a different area or if a broadcasting station’s
channel number has been changed, perform the following steps to
set the correct guide channel number.
NOTES:
● In many instances, the VCR Plus+ guide channel numbers for cable
and broadcast TV stations DO NOT match the channel number on
which it is received by your unit or cable box. Check your TV listing,
or contact your cable supplier for details.
● Many TV stations can be viewed on cable. Check your TV listing, or
contact your cable supplier for details.
Guide Channel Number Set
1 Press HDD or DVD so that the HDD or DVD lamp lights up on
the unit.
2 Press SET UP to access the Main Menu screen.
3 Press we to select “INITIAL SET UP”, then press t.
4 Press we to select “TUNER
SET”, then press t.
5 Press rt w e to select “GUIDE
CH SET”, then press ENTER.
6 Press rt to select “GUIDE
CH”, then press ENTER.
7 Press rt to select the Guide
Channel number for the desired
station as shown in the TV listings.
Then press ENTER.
● If you receive your channels with a
cable box and if you have properly
set your Controller, “CABLE CH”
appears in place of “DVD CH”. If not, perform “Cable Box and/or DBS
Receiver Control Setting (HDD & DVD Deck only)” (
੬ pg. 24).
8 Press rt to select “DVD CH”, then press ENTER. Press rt
to select the number of the unit’s channel position on which the
Guide Channel Number’s broadcast is received by the unit or the
DBS receiver. Then press ENTER.
● To timer-record a satellite program with the VCR Plus+ system, you
need to install the provided Satellite Controller and perform the
procedure described in “Cable Box and/or DBS Receiver Control
Setting (HDD & DVD Deck only)” (੬ pg. 24).
● Repeat steps 6 – 8 as necessary.
9 Press SET UP to complete the setting.
Changing VCR Plus+
®
Setting
● Turn on the unit.
● Turn on the TV and select the video channel (or AV mode).
● Slide the TV/CABLE/DBS/DVD switch to DVD.
rtwe
ENTER
SET UP
CABLE/DBS
DVDTV
Guide Channel Number
“Guide Channel (GUIDE CH) Number” refers to the assigned TV
station numbers, according to broadcast area, for the VCR Plus+
timer recording. The Guide Channel Numbers can be found in
most TV listings.
13
12
11
PRESS [SET UP] TO EXIT
ENTER
SELECT
EXIT
SET UP
SELECT WITH [ ] THEN PRESS [ENTER]
STB SET
AUTO CH SET
GUIDE CH SET
MANUAL CH SET
TUNER SET CLOCK SET
DVD VIDEO SET UP INITIAL SET UPFUNCTION SET UPHDD/DVD SET UP
13
12
11
PRESS [SET UP] TO EXIT
ENTER
SELECT
EXIT
SET UP
SELECT WITH [ ] THEN PRESS [ENTER]
INITIAL SET UP > GUIDE CH SET
CABLE CH
GUIDE CH
- -
1
RETURN
MX1S_00.book Page 86 Saturday, October 30, 2004 4:18 PM