Filter
Top Products
Masterpage:Right+
EN 53
Filename [MX1S_08VHS Operation.fm]
BASIC OPERATIONS ON VHS DECK
Page 53Saturday, 30 October 2004 16:18
1 Load a cassette with the record safety tab intact.
● The unit’s power comes on automatically and the counter is reset to
0:00:00.
2 Press VHS/HDD/DVD SELECT on the unit repeatedly or VHS
on the remote so that the VHS lamp lights up on the unit.
3 Press CH +/– or the number keys to select the channel you
wish to record.
4 Press REC MODE repeatedly to set the recording mode.
5 Press 7 on the unit to start recording. Or while holding 7, press
4 on the remote control.
● The VHS recording lamp lights up on the unit.
6 Press 9 to pause recording.
● You can select channel during the Record Pause mode.
● To resume recording, press 4.
7 Press 8 to stop recording.
● The VHS recording lamp lights off on the unit.
Recording Resume Function
If there is a power outage during recording, Instant Timer
Recording or timer recording
(੬ pg. 54, 60, 61), the recording will
resume automatically when power is restored to the unit unless the
unit’s memory backup has expired.
Watch Another Program While Recording On The Unit
While recording is going on, you can watch another program on
the TV by using the TV’s tuner.
NOTE:
It is required that the remote control is set to be able to operate the TV
in advance. (੬ pg. 78)
1 During recording, press TV/VIDEO to select TV mode if your
unit is connected to the TV via the RF connection.
● VHS mode is disengaged, and the VIDEO indicator on the front
display panel lights off.
● The program received on the TV’s tuner is displayed on the TV
screen.
2 Slide the TV/CABLE/DBS/DVD switch to TV.
3 Press CH +/– repeatedly to select the desired channel.
Basic Recording
● Turn on the unit.
● Turn on the TV and select the video channel (or AV mode).
● Slide the TV/CABLE/DBS/DVD switch to DVD.
4
7
8
0-9
REC MODE
VHS
CH+/
-
9
CABLE/DBS
DVDTV
CH +/
4
9
VHS/HDD/DVD
SELECT
7
REC
MODE
8
Recording Features
● Turn on the unit.
● Turn on the TV and select the video channel (or AV mode).
● Slide the TV/CABLE/DBS/DVD switch to DVD.
● Press VHS/HDD/DVD SELECT on the unit repeatedly or VHS on
the remote so that the VHS lamp lights up on the unit.
7
VHS/HDD/DVD
SELECT
DISPLAY
VHS
CANCEL
TV/VIDEO
CH+/
-
CABLE/DBS
DVDTV
VIDEO indicator lights off.
MX1S_00.book Page 53 Saturday, October 30, 2004 4:18 PM