Filter
Top Products
Masterpage:Right+
EN 23
Filename [MX1S_05Name.fm]
INITIAL SETTINGS
Page 23 Saturday, 30 October 2004 16:18
Auto Channel Set
Perform Auto Channel Set only if channels have not been set
correctly by the Plug&Play setting.
1 Press HDD or DVD so that the HDD or DVD lamp lights up on
the unit.
2 Press SET UP to access the Main Menu screen.
3 Press we to select “INITIAL SET UP”, then press t.
4 Press we to select “TUNER
SET”, then press t.
5 Press rt we to select
“AUTO CH SET”, then press
ENTER. You can automatically
set the receivable channels in
your area in the order of their
frequencies.
● When Auto Channel Set is
complete, “SCAN COMPLETED”
appears on the TV screen.
● If the scan was unsuccessful, “SCAN COMPLETED–NO SIGNAL–”
appears on screen. Check the connections and start again.
6 Press SET UP to complete the setting.
Manual Channel Set
You can add the channels you want or delete the channels you do
not want manually.
1 Press HDD or DVD so that the HDD or DVD lamp lights up on
the unit.
2 Press SET UP to access the Main Menu screen.
3 Press we to select “INITIAL SET UP”, then press ENTER.
4 Press we to select “TUNER SET”, then press t.
5 Press rt we to select “MANUAL CH SET”, then press
ENTER.
6 Add or skip the desired channels.
To add channels
A Press rt to select “CH”, then
press ENTER.
B Press the number keys to enter
a channel number you want to
add, then press ENTER.
C Press rt to select “ADD/SKIP”,
then press ENTER.
D Press rt to select “ADD”, then press ENTER.
E Repeat B – D to add other channels.
To skip channels
A Press rt to select “CH”, then press ENTER.
B Press rt to select a channel number you want to skip, then
press ENTER.
C Press rt to select “ADD/SKIP”, then press ENTER.
D Press rt to select “SKIP”, then press ENTER.
E Repeat B – D to skip other channels.
7 Press SET UP to complete the setting.
Tuner Set
● Turn on the unit.
● Turn on the TV and select the video channel (or AV mode).
● Slide the TV/CABLE/DBS/DVD switch to DVD.
INFORMATION
The unit selects the correct band (TV or CATV) automatically
during Auto Channel Set. The selected band will be displayed on
the right side of “BAND” on the Tuner Set screen.
rtwe
ENTER
SET UP
DVD
HDD
0-9
CABLE/DBS
DVDTV
13
12
11
PRESS [SET UP] TO EXIT
ENTER
SELECT
EXIT
SET UP
SELECT WITH [ ] THEN PRESS [ENTER]
STB SET
AUTO CH SET
GUIDE CH SET
MANUAL CH SET
TUNER SET CLOCK SET
DVD VIDEO SET UP INITIAL SET UPFUNCTION SET UPHDD/DVD SET UP
PRESS [SET UP] TO EXIT
ENTER
SELECT
EXIT
SET UP
SELECT WITH [ ] THEN PRESS [ENTER]
INITIAL SET UP > AUTO CH SET
AUTO CHANNEL SET SCANNING
CANCEL
PRESS [SET UP] TO EXIT
ENTER
SELECT
EXIT
SET UP
SELECT WITH [ ] THEN PRESS [ENTER]
INITIAL SET UP > MANUAL CH SET
CH
BAND
1
CATV
ADD/SKIP ADD
RETURN
MX1S_00.book Page 23 Saturday, October 30, 2004 4:18 PM