Filter
Top Products
94
User's Guide Fireface 800 © RME
36.5 Digital Outputs
AES/EBU - SPDIF
• 1 x RCA, transformer-balanced, galvanically isolated, according to AES3-1992
• Output level Professional 2.6 Vpp, Consumer 1.2 Vpp
• Format Professional according to AES3-1992 Amendment 4
• Format Consumer (SPDIF) according to IEC 60958
• Single Wire mode, sample rate 28 kHz up to 200 kHz
ADAT
• 2 x TOSLINK
• Standard: 16 channels 24 bit, up to 48 kHz
• Sample Split (S/MUX): 2 x 8 channels 24 bit / 48 kHz, equalling 8 channels 24 bit 96 kHz
• In Quad Speed mode output of Single Speed sync frame
Word Clock
• BNC
• Max. output voltage: 5 Vpp
• Output voltage @ 75 Ohm termination: 4.0 Vpp
• Output impedance: 10 Ohm
• Frequency range: 27 kHz – 200 kHz
36.6 Transfer Modes: Resolution / Bits per Sample (Windows only)
ASIO
• 24 / 32 bit 4 byte (stereo 8 byte)
This format is compatible with 16-bit and 20-bit. Resolutions below 24-bit are handled by the
audio application.
MME
• 16 bit 2 byte (stereo 4 bytes)
• 16 bit 4 byte MSB (stereo 8 bytes)
• 24 bit 4 byte MSB (stereo 8 bytes)
• 32 bit 4 byte (stereo 8 bytes)
MME interleaved supports 2-channel, 4-channel, 6-channel and 8-channel playback in the
above formats. The modes 4/6/8-channel playback are limited to the devices
Fireface Analog (1+2): Up to 192 kHz, playback on the analog outputs 1-8
Fireface ADAT1 (1+2): Up to 48 kHz, playback on channels 13-20
Fireface ADAT2 (1+2): Up to 48 kHz, playback on channels 21-28
36.7 General
• Power supply: Internal switching PSU, 100 - 240 V AC, 30 Watt
• Typical power consumption: 22 Watt
• Dimensions including rack ears (WxHxD): 483 x 44 x 242 mm (19" x 1.73" x 9.5")
• Dimensions without rack ears/handles (WxHxD): 436 x 44 x 235 mm (17.2" x 1.73" x 9.3")
• Weight: 3 kg ( 6.6 lbs)
• Temperature range: +5° up to +50° Celsius (41° F up to 122°F)
• Relative humidity: < 75%, non condensing