Filter
Top Products
RECALLING THE PROGRAM
66
RECALLING THE PROGRAM
1. Follow Steps 1 through 4 of "Programming the timer for unattended recording" on pages 40 and 41.
SELECT NUMBER 1 TO 7
1 VCR PLUS RECORDING
2 DELAYED RECORDING
3 PROGRAM REVIEW
4 INITIAL SETUP
5 CLOCK SET
6 VCR PLUS SETUP
7 PROBLEM GUIDE
*TO END PRESS GUIDE
2. Press "3" button (Program Review).
3. Press "3" again if you want to review the next program information immediately.
PROGRAM 1 <ONE TIME>
CH 04
START TIME 06:00 PM
END TIME 07:30 PM
START DATE 12/24/92 THU
TAPE SPEED EP
PRESS CLEAR TO ERASE
PRESS 3 FOR NEXT
*TO END PRESS GUIDE
Note: If you have programmed two or more programs and does not press "3", the information on each
program will automatically switch every 10 seconds.
4. When you finish reviewing the programs, press the GUIDE button two times to switch off the on-screen
display.