Filter
Top Products
RECORDING TV PROGRAMS
41
INITIAL SETUP
1 ANTENNA/CABLE <ANT.>
2 AUTO CHANNEL SETTING
3 ADD OR ERASE CHANNEL
4 VCR CODING <VCR1>
5 MOVIE RETURN <ON>
6 AUDIO PLAYBACK <HIFI>
7 STEREO/MONO <STEREO>
8 SECOND AUDIO <ON>
*TO END PRESS GUIDE
Counter memory function
This is useful if there is a section of tape you want to view immediately after recording or you want to
return to the same point several times.
1. Press the DISPLAY button to display the counter reading on the TV screen.
2. Begin recording or playing back a tape.
3. At the point you want playback to start, press CLEAR button to reset the Counter to "0:00:00".
4. Press the STOP button when recording or playback finishes.
5. Press the DISPLAY button again to display the counter memory "M" on the TV screen.
6. Press the REW button. The tape will automatically stop at the pre-selected "0:00:00M" position.
NOTE: The tape will also automatically stop at about "0:00:00M" during fast forwarding.