Filter
Top Products
VCR Plus + FEATURE
48
• Numbers indicate tape speeds with normal play as 1.
* The slow-motion or reverse slow-motion speed responds to the extent to which the slow speed buttons
on the remote control are adjusted.
NOTES:
• The picture may have noise, streaking or other distortion when it changes.
• If noise bars appear on TV screen during slow/still mode, first set the VCR to slow mode and then press
TRACKING control button ( or ) to minimize noise bars. Now the noise bars in still mode are eliminated
automatically.
VCR Plus + FEATURE
The VCR Plus+* feature will allow you to program the VCR for timed recording by simply entering a Plus
Code* number.
The up-to-8 digit Plus Codes are published in the TV listings in many newspapers, TV Guide and the local
cable-TV guides. The Plus Code numbers provide the VCR with all the information it needs for timer
recording, so there is no need to program date, recording start time, stop time or channel number.
Channel Set-up
Before using the VCR Plus+ feature, you need to assign the local channels in your area to the VCR Plus+
channels stored in VCR memory. This is called channel set-up. Channel set-up is necessary because
broadcast and cable-TV stations use different TV channels in different areas. If you enter a Plus Code
number to record a channel that is different from the VCR Plus+ channel without performing the set-up
operation, your VCR will record the wrong program.
There are three channel set-up methods depending on your TV hook up home antenna, cable-TV or
cable box. See connections A, B and C on the next page to find out which suits you and read the
corresponding instructions carefully.