Filter
Top Products
VCR Plus+ SET UP FOR CONNECTION B
55
Notes:
• If you enter a wrong number, press the CLEAR button, then enter the correct number.
• Repeat steps 4 and 5 to assign all cable-TV channels to the VCR Plus+ channels as required.
7. Press the GUIDE button.
Channel set-up operation is now complete and the original menu is on the TV screen.
VCR Plus+ SET UP FOR CONNECTION B
If you are receiving all channels through cable box, perform the following procedure.
1. Make sure the channels are correctly tuned as shown on pages 20 and 21.
2. Press the GUIDE button to display the menu, as illustrated, on the TV screen.
SELECT NUMBER 1 TO 7
1 VCR PLUS RECORDING
2 DELAYED RECORDING
3 PROGRAM REVIEW
4 INITIAL SETUP
5 CLOCK SET
6 VCR PLUS SETUP
7 PROBLEM GUIDE
*TO END PRESS GUIDE
3. Press button "6" for VCR PLUS SETUP.
IS A CABLE BOX BEING
USED WITH THE VCR
FOR ALL CHANNELS?
1 NO
2 YES
*TO END PRESS GUIDE
4. Press button "2".
ENTER OUTPUT CHANNEL
OF THE CABLE BOX
EITHER CHANNEL
03 OR 04
--
*TO END PRESS GUIDE
5. Press two number buttons for the cable box's output channel.
Example: If the cable box's output channel is "03":