Filter
Top Products
2-20
User Guide for Cisco Digital Media Encoder 2200
OL-17938-01
Chapter 2 Getting to Know the Cisco Digital Media Encoder 2200
Advanced Operation: Using the Niagara SCX Web Interface
The log is updated for every event on the encoder. The log now includes the starting and stopping events
for the encoder from the
“Starting an Encoding Session” section on page 2-17 and “Stopping an
Encoding Session” section on page 2-18.
Each event is date and time stamped. Pressing the Clear Activity Log button in the upper-right clears
all logged activities.
Configuring the EZStream Buttons
The encoder provides one-button streaming via the EZStream buttons located on the front panel of the
system. By default, these buttons are not assigned to an encoder. The Niagara SCX Web Interface is
used to configure each button to a specific encoder.
You can assign a preset encoder using the Niagara SCX Web Interface by moving your mouse pointer
over Encoders in the menu bar and selecting Preset A, B, or C in the drop-down menu. A preset is a
quick way to select and assign a specific encoder to Preset A, B, or C.