Filter
Top Products
3-40
User Guide for Cisco Digital Media Encoder 2200
OL-17938-01
Chapter 3 Using the Ease Menu and Niagara SCX Web Interface
Niagara SCX Web Interface
Click the Options button so the settings tabs are viewable. Click the Local Resources tab. Under the
Remote computer sound setting, change the drop-down selection to the Leave at remote computer
option.
You may then enter the user name and password to access the encoder. The password for connecting to
the encoder by using remote desktop is password and the user name depends upon the software running
on the encoder:
Note When exiting from Remote Desktop Connection, DO NOT LOG OUT. Instead, DISCONNECT from
the encoder. This allows its internal programs to continue running.
Next, complete the following steps:
• Copy the DRM profiles to a protected location on the encoding system to ensure they will not be
accidentally removed or erased. We recommend that you create a new directory on the D: drive on
the encoder, and use this directory to store your DRM profiles.
Release User Name
5.2.184.0 and earlier gostream
later than 5.2.184.0 niagara