Filter
Top Products
1-6
User Guide for Cisco Digital Media Encoder 2200
OL-17938-01
Chapter 1 Installing the Cisco Digital Media Encoder 2200
Installation
Front Panel Diagram
You should familiarize yourself with the front panel controls for the Cisco Digital Media Encoder 2200.
Besides the basic buttons for power, start/stop, up/down and menu access, there are also several indicator
lights.
Figure 1-2 and Table 1-2 illustrate all buttons and lights, so you can review the front panel
functions and interface.
Figure 1-2 Front Panel Diagram
Table 1-2 Front Panel Buttons and Lights
Item Description
Control Buttons
Power Pressing this button once will power up Niagara Pro II. When Niagara Pro II is powered up,
pressing this button once will power down the system. Pressing and holding for 5 seconds will
perform an immediate power off.
EZStream Buttons When an encoder profile is assigned to one of these buttons, pressing the assigned button and then
the Stream button will start the encoder. Pressing the assigned button and then the Stop button will
stop the encoder.
Alarm Information When the Alarm Light indicator is lit, pressing this button will provide a log of the most recent
alarms recorded. Pressing the Enter button will clear these alarms from the log.
Menu Pressing this button will activate the encoder menu on the LCD display.
Enter Pressing this button will enter or accept the menu choice highlighted on the LCD display. It is used
for menu operations.
Up/Down These buttons are used for menu navigation on the LCD display.