Filter
Top Products
3-54
User Guide for Cisco Digital Media Encoder 2200
OL-17938-01
Chapter 3 Using the Ease Menu and Niagara SCX Web Interface
Niagara SCX Web Interface
Advanced Settings (Network)
Advanced Settings provides the encoder network name, MAC Address and server IP address settings.
The encoder network name is a link. If you click this link, you will be directed to the My Encoder page.
From this page you can change the encoders’s network name. For more information, see the
“Computer
Name” section on page 2-45.
The Active Network Link field uses two icons to indicate whether the network interface card selected
has a network connected.
System Configuration Settings
The System Configuration Settings page allows you to modify your encoder default system settings.
You can configure email settings so that Cisco
Digital Media Encoder 2200 can send an email to
predefined email addresses whenever the encoder encounters an alert condition. You can also customize
the information that the encoder displays on its front panel when the system is idle.
Table 3-1 Network Link Icons and Descriptions
Icon Description
The network link is detected.
The network link is not detected.